Combination: roof hatch type RHT9024 with fixed stair GS55

Specification

TÜV certified according to EN-ISO 14122-3:2001, with label "Baumuster geprüft".

Roof hatch type RHT9024
Standard opening size: 900 x 2400 mm
Weight: 86 kg
Gorter® - completely assembled with:

Thermal separated and insulated aluminium construction
Counterbalancing system for assisted opening and controlled closing
Double sealing for water and weather tightness
Lid that engages automatically in open position, with release button
Diagonal hand rail to safely enter and leave roof hatch
Three point Eurocylinder lock (31 x 60 mm), in and outside operation

Performance:

Insulation value (EN-ISO10077-1/2): Rc = 3,2 (m².K)W; U = 0,31 W/(m².K)
Sound reduction (EN-ISO140-3): 27 dB
Wind and water tightness (EN1027/EN1873): 650 Pa
Construction strength (EN1026/EN1027): ± 3000 Pa
Air tightness (EN 1026): 0,5 m³/hm1
Snow load EN 1991-1/5): 200 kg/m²

Coating:

Standard powder coated RAL7047 (outside) and RAL9010 (inside)

Fixed stair, type GS55
Gorter complete assembled. Aluminium, anodized.
Roomheight: ........ mm

Pitch adjustable from 55°- 65°
Standard room height 3000 mm (55°) - 3370 mm (65°)
Option: room height up to 3500 mm (typeGS55-H)

Step:

Size 730 x 175 x 45 mm
With anti skid profile

Accessories

Brackets for fixation on floor and in roof or ceiling opening
2 Handrails complete with poles.

IMPORTANT: ready for installation on site

Options

Gorter® - Electrical Operation of Roof Hatches and Floor Doors

electrical_operation Depending on door type, cover weight and other requirements we can install one or more rack-and-pinion drives. These drives are available in 24 Vdc or 230 Vac
Operation and control 230Vac
This system is controlled with a surface mounted or built-in switch. Operation of two drives through one switch is possible.
Operation and control 24Vdc
Operation of one or more drives is controlled by a control box with rectifier that is connected to the electricity network.
Features

communication with central alarm system
emergency switch
certified for smoke vent system / fire resisting system
programmable
operation control of other objects
control by automatic detectors - smoke, rain, wind, fire etc.
automatic sequence control of two covers that are overlapping
automatic stop in case of unequal load or overload
etc.

Depending on the features we will recommend a suitable control box type.
Emergency hatches and doors:
It is of life importance that an emergency door opens after a break down of the electrical system. For those reasons a control box can be provided with a built-in emergency power pack.
If the emergency situation is very critical it advisable to apply doors that can be manually operated after a total break down of electrical network system and the emergency power pack.
Electrical installation:
Roof Hatches and Floor Doors will be supplied with drives installed together with required options as control box, switches, detectors, installation drawings and electrical diagrams. Electrical installation should be carried out by an electrical contractor.

Specification Gorter® Safety Railing

safety_railing Partition and marking of safe area on the roof
Components: