Roof hatch, type RHT7014
Standard opening size: 700 x 1400 mm (Hinge side = long side)
Weight: 68 kg
Gorter® - completely assembled with:
- Thermal separated and insulated construction
- Counter balancing system for assisted opening and controlled closing
- Diagonal hand rail to safely enter and leave roof hatch
- Double sealing for water and weather tightness
- Fully opened lid engages automatically, with release button
- Stainless steel Eurocylinder lock, in- and outside operation
CodeMark certified for Australia & New Zealand
- Australia CM70087, New Zealand CM70088
Performance according to CE (ETA-15/0338):
- Resistance to permanent loads (Eurocode EN 1993-1-1): 1050 kg/m²
- Sound reduction (EN-ISO140-3): 26 dB
- Watertightness (EN 12208): Class E 650
- Resistance to wind load (EN 12210): Class E 3000
- Resistance to snow loads (EN 1991-1-3): 3.97kN/m²
- Impact hard body (EN 356): Class P5A
- Impact soft body (EN 13049): Class 5
- Air permeability (EN 12207): Class 3
RHT powder coating:
Outside: powder coated in RAL7047
Inside: powder coated in white RAL 9010 (optional black RAL9004)
Scissor stair, type Large
Casing:
- For structural opening size (w x L x H): 700 x 1200 x 250 mm
Ceiling height: ........ mm, standard 3000 mm.
to be specified from top of floor to bottom of cover.
Option: up to 3500 mm (type Large-H)
Stair:
- Material: cast aluminium
- Size steps: 350 x 140 x 26 mm, anti-skid
- Step distance: ca. 250 mm, depending on ceiling height
- Horizontal position of steps is adjustable
Projection while opening:
Max. 700 mm at ceiling height 3000 mm (type Large)
Max. 950 mm at ceiling height 3500 mm (type Large-H)
Hardware:
- Hook and eye
- Handrail prepared for padlock to secure retracted stairs
- Stair guide control system
Extension of scissor stair in plenum (option):
The stair can be extended to bridge the distance between ceiling and roof hatch in cases where it is mounted in a suspended ceiling / plenum
